prusa-mini-revo
Print settings and optimization for Prusa Mini+ with E3D Revo Micro hotend, bowden direct drive extruder, and ObXidian nozzles (0.25mm, 0.4mm, 0.6mm, 0.8mm). Use when the user asks about print settings, slicer profiles, troubleshooting prints, material temperatures, flow rates, nozzle selection, or optimizing prints for this specific printer configuration. Triggers on phrases like "print settings", "slicer profile", "layer height", "print speed", "temperature", "first layer", "stringing", "calibration", "which nozzle", or any 3D printing task mentioning Prusa Mini, Revo, or ObXidian.
Installation and usage
Print settings and optimization for Prusa Mini+ with E3D Revo Micro hotend, bowden direct drive extruder, and ObXidian nozzles (0.25mm, 0.4mm, 0.6mm, 0.8mm). Use when the user asks about print settings, slicer profiles, troubleshooting prints, material temperatures, flow rates, nozzle selection, or optimizing prints for this specific printer configuration. Triggers on phrases like "print settings", "slicer profile", "layer height", "print speed", "temperature", "first layer", "stringing", "calibration", "which nozzle", or any 3D printing task mentioning Prusa Mini, Revo, or ObXidian.
Once installed, you can use this skill by running the following command in your terminal:
skills use prusa-mini-revo