cw-beacon
Control the CW (Morse code) beacon on the Raspberry Pi test instrument. Uses GPCLK hardware clock generator on GPIO 5/6 to produce a square-wave RF carrier in the 80m band (~3.5-4.0 MHz), keyed with Morse code at configurable WPM. Use for direction finder testing, RF beacon generation, or Morse transmission. Triggers on "CW beacon", "Morse beacon", "direction finder", "80m signal", "GPCLK", "RF carrier".
Installation and usage
Control the CW (Morse code) beacon on the Raspberry Pi test instrument. Uses GPCLK hardware clock generator on GPIO 5/6 to produce a square-wave RF carrier in the 80m band (~3.5-4.0 MHz), keyed with Morse code at configurable WPM. Use for direction finder testing, RF beacon generation, or Morse transmission. Triggers on "CW beacon", "Morse beacon", "direction finder", "80m signal", "GPCLK", "RF carrier".
Once installed, you can use this skill by running the following command in your terminal:
skills use cw-beacon