home/categories/monitoring/mohitmishra786-low-level-dev-skills-skills-embedded-openocd-jtag-skill-md
monitoringdevops
openocd-jtag
OpenOCD skill for embedded hardware debugging. Use when configuring OpenOCD for JTAG or SWD targets, flashing firmware, connecting GDB to bare-metal targets, setting hardware watchpoints, or using J-Link with OpenOCD. Activates on queries about OpenOCD, JTAG, SWD, GDB remote target, flash programming, hardware breakpoints, J-Link, or connecting GDB to an MCU.
maintainer
mohitmishra786
更新於 3/4/2026
星標
53
分支
8
quick start
Installation and usage
OpenOCD skill for embedded hardware debugging. Use when configuring OpenOCD for JTAG or SWD targets, flashing firmware, connecting GDB to bare-metal targets, setting hardware watchpoints, or using J-Link with OpenOCD. Activates on queries about OpenOCD, JTAG, SWD, GDB remote target, flash programming, hardware breakpoints, J-Link, or connecting GDB to an MCU.
安裝
$ install --globalskills.sh
使用
安裝後，您可以透過在終端機執行以下指令來使用此技能：
skills use openocd-jtag